Take the photo in the Camera app, then tap Read a photo and pick it from your library. Photos taken from inside Safari lose their exposure data.
In the Camera app, photograph something mid-toned in the same light as your subject (grass, pavement, a grey card, the back of your hand plus one stop). Then tap Read a photo and pick it from your library. Don't use "Take Photo" from that menu: Safari strips the exposure data from photos taken that way. Tip: add the Camera control to Control Center so it's one swipe away. The meter reads the shutter, aperture and ISO your iPhone used and converts them for the film and f-stop you picked.
Speeds slower than 1/60 are flagged because the SP500's slow-speed escapement has been unreliable. Speeds faster than 1/500 don't exist on the SP500, so those combos are crossed out.
Checking against the SP500's own meter: centre its needle, then compare its shutter speed with this one at the same f-stop. Its CdS cell is old and often reads dim (giving more exposure), and it was built for mercury cells that aren't sold now, so a stop or so of difference is normal. Your negatives decide which is right; then set the calibration below.
If your negatives come back consistently dense, raise this; if thin, lower it. Saved on this phone.
Opens the camera for a second and lists what Safari will tell a web page about it. If it includes exposure time and ISO, the meter can read the live camera directly.
No photo handy? Tap the light that matches and it becomes your reading.
| Light | Shutter |
|---|